BYZNB - PROBOND ALL PURPOSE BONDING AGENT PRIMER, 934250

  • MSDS: BYZNB
  • Manufacturer: CAULK DENTSPLY
  • Product Name: PROBOND ALL PURPOSE BONDING AGENT PRIMER, 934250
  • National Stock Number: 6520-00N063868
Product Identification

Product ID:PROBOND ALL PURPOSE BONDING AGENT PRIMER, 934250
MSDS Date:06/03/1993
FSC:6520
NIIN:00N063868
MSDS Number: BYZNB

Responsible Party
CAULK/DENTSPLY
CLARKE AND LAKEVIEW AVES
MILFORD, DE 19963-0359
US

Emergency Phone: 302-422-4511

Info Phone: 302-422-4511

Cage: 11107

Contractor
CAULK/DENTSPLY
359 MILFORD, DE 19963-0359 US

Telephone: 302-422-4511/ 703-451-1900

Cage: 11107

Ingredients

ACRYLIC MONOMER AND ELASTOMER

OSHA PEL N/K

ACGIH TLV: N/K


ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


ACETONE (SARA 313) (CERCLA)

CAS: 67-64-1

RTECS: AL3150000

OSHA PEL 1000 PPM

ACGIH TLV: 750PPM/1000STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:MAY CAUSE IRRITATION AND POSSIBLE
CORNEAL DAMAGE. INDIVIDUALS SENSITIVE TO ACRYLATES MAY DEVELOP
ALLERGIC RESPONSE. DERMAL IRRITATION. POSSIBLE NAUSEA ON PROLONGED
EXPOSURE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:OPEN SORES OR WOUNDS ON SKIN. KNOWN
SENSITIVITY TO ACRYLICS.

First Aid

First Aid:INHALATION:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTF RESP) . INGESTION:CONSULT PHYSICIAN. SKIN:WASH AFFECTED
AREA WITH SOAP AND WATER. EYES:FLUSH WITH WATER FOR AT LEAST 15
MINUTES T HEN CONSULT PHYSICIAN.

Fire Fighting

Flash Point:<73F,<23C
Extinguishing Media:CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:KEEP AWAY FROM FIRE.

Accidental Release

Spill Release Procedures:ABSORB SPILL WITH INERT MATERIALS SUCH AS
VERMICULITE OR DRY SAND THEN PLACE IN AN APPROPRIATE CONTAINER FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID PROLONGED EXPOSURE ABOVE 100F.
STORE AWAY FROM OXIDIZING AGENTS SUCH AS PEROXIDES.
Other Precautions:STORE AWAY FROM FOOD.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APROVED SELF CONTAINED BREATHING
APPARATUS DURING HIGH VAPOR CONCENTRATIONS.
Ventilation:LOCAL EXHAUST AS RECOMMENDED. MECHANICAL VENTILATION USING
EXPLOSION-PROOF MOTORS IS ACCEPTABLE.
Protective Gloves:LATEX OR RUBBER.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING WITH
CHEMICALS.
Supplemental Safety and Health
BP:158F, 70C:MAY GEL FIRST.

Chemical Properties

Boiling Pt:B.P. Text:SUPP DATA
Spec Gravity:1.0
Solubility in Water:100% SOLUBLE.
Appearance and Odor:WATER WHITE LIQUID WITH ACETONE/ALCOHOL ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:PROLONGED HEATING AT ELEVATED
TEMPERATURES.
Hazardous Decomposition Products:ACRYLIC MONOMERS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.